Water Based Fire Extinguisher Filling Machine

Storage volume: 50 liters

Power: ≤90 watts

Voltage: 220V

Loading accuracy: ≤±0.015(1kg)

Filling speed: 6kg/min

Add an appropriate amount of the original drug solution to the reservoir of the machine. Connect the water injection line and open the inlet valve to inject clean water. If the amount of water injected is not 50 liters, determine the amount of water injection by looking at the water level indicator on the side of the chassis. 5 liters per grid, the right amount of people to close the inlet valve, if a water injection is 50 liters / hour, open the inlet valve, automatically fill the water when the amount of water is injected to 50 liters. Just close the inlet valve. If the original liquid has been prepared in the large liquid storage tank, the liquid storage tank for placing the original chemical liquid can be directly connected with the water inlet pipe of the filling machine, and the liquid medicine can be injected into the liquid storage tank of the filling machine. There is no need to dispense liquid in the filling machine reservoir. Turn on the power to turn on the pump. Do not put any objects on the weighing platform, the weight display instrument enters the self-test state, and a moment will appear “0.000”, indicating that the electronic scale automatically returns to zero. (Before the instrument returns to zero, do not press any key on the meter to avoid causing Instrumentation is confusing). Then set the required parameters. (The calibration of the electronic scale has been adjusted at the factory. It is not necessary to adjust. If you need to modify the parameters, please refer to the electronic scale parameter calibration setting section). Place the filled cylinder on the electronic scale and place the filling liquid filling tube. When the [zero] indicator of the display is on, press the [zero] key, and the display shows “0.000” to finish the peeling and open the irrigation. The manual valve of the tube is filled with the automatic filling button, and the medicine will be filled into the fire extinguisher. When the weight of the filling medicine reaches the set value, the filling machine automatically stops filling, closes the filling tube manual valve, takes out the filling tube and completes After one filling, the analogy is due to the use of positive pressure refilling and mixing of the original liquid and water. After filling 50 kg of the drug each time, there will be a little mixture in the liquid storage tank. If there is any influence on the next liquid ratio, the remaining liquid can be discharged from the bottom of the barrel.

 

HENAN UNIQUE packaging machinery is produced by strict production control. The machine is of high quality. The after-sales service is first class and we will provide all-round tracking service.