Antifreeze Filling Machine Small Type

This small antifreeze filling machine is a semi-automatic liquid filling machine with two filling heads. It is suitable for various shapes of bottles and barrels. The machine is widely used for different antifreeze solutions with or without viscosity. It is very economical and convenient to use. It adopts piston quantitative filling with mechanical anti leakage.

Antifreeze Filling Machine Specification:

Number of filling machines: 2

Filling capacity: flow type: 1-5.5 litre

Production capacity: 200-400 bottles / hour

Capacity range: 0.1-1 1-5.5 (litre)

Filling accuracy:±0.5%

Air source pressure: 0.5-0.7 (MPa)

Analysis of Failures of Small Antifreeze Filling Machine:

The antifreeze filling machine cylinder does not work for the following reasons: whether the fuse is burnt out, such as burnt out, please replace the new → emergency stop switch is pressed, rotate the emergency stop switch to make it return to the original position → material cylinder Whether the piston O-ring is sticky, the piston is stuck, replace the O-ring seal → the filling valve core inside the filling head is stuck, reinstall the valve core position → whether the air source and power switch are turned on, turn on the power And air source switch → two magnetic switches are intact, if there is damage, please replace the new → barometer to meet the requirements and whether there is air source into the machine, please connect the gas source and determine the pressure reaches the demand → the cylinder piston is stuck To die, reinstall the piston to the position → fix the position of the magnetic switch. The rear magnetic switch must be fixed at the rear of the cylinder to enable the cylinder to work and cannot move.