Automatic Bag Given Powder Packing Machine Working Process and Maintenance

1. Upper bag: The bag is taken off the bag and sent to the machine folder, without bag warning, reducing the employment and labor intensity;

2. Print production date: ribbon detection, ribbon out of the shutdown alarm, touch screen display, to ensure that the package is properly coded;

3. Open the bag: the automatic powder packaging machine open bag detection, do not open the bag does not blank, to ensure that the material is not lost;

4. Filling materials: testing, no material is not filled, heat sealing is not sealed, to ensure that no bags are wasted; vacuum cleaning: the anti-floating dust in the packaging process of the soft bag packaging machine is sucked, and then the dust of the bag mouth is cleaned; Straighten the bag mouth: effectively straighten the bag mouth and ensure that the packaging materials such as starch, powder seasoning, washing powder, pesticide, chemical powder do not overflow the bag.

5. Heat sealing and sealing: 0-300 degree temperature adjustment according to the material of the packaging bag, alarm when the temperature is abnormal to ensure the sealing quality

6. Cooling and shaping, discharging: ensure the sealing is beautiful.

Automatic Bag Given Powder Packing Machine Maintenance 

1.Firstly, completely clean the bag-type automatic powder packaging machine and tighten the parts of the machine;

2.Adjust the size of the machine according to the size of the package; the joints of the parts are regularly lubricated, and the most important thing is to change seasons. Moreover, the storage of the supporting facilities should be absolutely sealed, and the whole machine should be placed in a dry environment to ensure that the small bag powder packaging machine is not corroded by liquid or the like. 

3.Familiar with the adjustment and use of the soft bag packaging machine, be sure to follow the instructions.

4.According to the instructions of the bag-type automatic powder packaging machine, refueling (pay attention to the oil level) and strictly observe that it is not allowed to reverse, so as to avoid the misoperation of the pump and the reverse of the pump, the oil is sprayed into the vacuum system of the pump, often under inspection. There is no foreign matter on the hot-pressing varnish (polytetrafluoroethylene), and it is flat to ensure the sealing strength.

5.Always check whether the grounding of the small bag powder packaging machine is in good contact and ensure safe use of electricity.

6.When the soft bag packaging machine is faulty, the power should be turned off in time. If necessary, the emergency stop button should be connected. After the air is released, the cover is lifted, then the voltage is turned off, the cause is checked, and the fault is eliminated.