![[!--oldtitle--]](/d/file/news/2018-09-27/e7e489ee5fe1938ae23e60d8fc153d7b.jpg)
Due to the source of raw materials, processing technology and quality, common edible oils are mostly vegetable oils, including corn oil, rapeseed oil, peanut oil, corn oil, olive oil, camellia oil, palm oil, sunflower oil, soybean oil, sesame oil, and flaxseed oil. Our edible oil filling machine generally adopts flowmeter type filling. Flowmeter type filling is a computer that automatically tracks the temperature and density of oil and adjusts the oil quantity at any time, so that the oil quality is reduced with the change of temperature and density. The precision is relatively high, and both of the two methods of constant volume filling and constant mass filling are adopted. We will give a brief description for the edible oil filling machine cleaning and maintenance.
1. After using the product, rinse the remaining cooking oil or disassemble it to clean the dead corner.
2. If there is noise in the edible oil filling machine, it is the lack of oil in the machine gear, or there is wear and tear, then you need to replace or add oil.
3. If you are not using the edible oil filling machine every day, you should simply seal the machine after cleaning it, but use it to prevent impurities in the next use.
4. Do a good job of the daily use of lubricating oil filling machine, if not used for a long time, should be checked before use, then open the machine, and then in the processing.
1. Turn off the power supply and the oil inlet valve after the work is completed.
2. Add cylinder oil to the pneumatic triplet regularly.
3. The flowmeter used in this machine is a precision instrument. Therefore, the oil must be precisely filtered before it can be filled.
4. When not using the machine for a long time, wipe all parts clean and cover it with plastic or tarpaulin.
5. Pay attention to keep the infrared sensor clean. Always wipe it clean with clean cotton. Do not place any object close to the sensor during work. Do not have strong light directly reflected or reflected on the sensor. Otherwise, it may malfunction.
6. Always keep the equipment clean, especially for the electrical appliances on the electric disc. It is necessary to prevent moisture and dust. It is forbidden to change the program to the inverter and the program controller.
7. Machine voltage should be stable, not more than ± 15%, the material temperature should be maintained at 10°C ~ 40 °C, the ambient temperature should be maintained at 5° C-40°C, the temperature should be maintained at 5 ~ 95% PH.
