How to Operate and Maintain Filling Machine?

With the improvement of living standard, people has more demands for beverage and cosmetics product. Now more and more beverage filling machine, bottle brushing machine and rinsing machine are widely used in the market. Then it’s very important for company’s production to operate and maintain the machine properly.

1.First, you need to read the operation instruction carefully, then prepare the relative device before machine testing.

2.The filling track and the bottle receiving tray are leveled, the liquid storage tank is filled with materials, and all the electrical switches are in the closed position.

3.The filled container is inserted into the tool box, and the external power supply is connected. The power socket must be a three-pin socket and has a reliable grounding wire to prevent the power leakage of the casing from being turned on, and the power indicator is turned on.

4.The mounting support plate holds the filling frame and points to the positioning sleeve on the top filling head. The positioning sleeve should be able to move up and down flexibly, and the filling needle is exposed or retracted without hindrance.

5.The switch under the liquid storage tank is turned to the open position, so that the material can flow into the total metering pump. According to the total filling amount of each container, adjust the screw on the crank and rotate the knob of the filling speed control board to 20 degrees. Left and right, then turn the switch on the filling speed control board to the open position.

6.When the filling head out of the liquid is the set amount, screw the liquid amount fine-tuning nut, cover the filling head housing, and loosen the filling bracket support plate.

Pay attention to its maintenance after the filling machine is used. When removing and disassembling the piston during maintenance, remove the fixing screws at the same time to avoid affecting the other process requirements when the first one is removed. Before the piston filler is cleaned, the remaining product should be removed and the tank filled with a mild cleaning solution. The cylinder has been lubricated at the factory. Please do not open or add any lubricating oil to ensure that the surface of the filling machine is clean and hygienic. In addition, while maintaining and properly using the filling machine, it is necessary to conduct regular inspections and commissioning. Only such a filling machine can work healthily and steadily.